Chrysler Concorde 2004 Service Manual page 814

DRIVEABILITY - NGC
Symptom List:
P0351-IGNITION COIL #1 CIRCUIT
P0352-IGNITION COIL #2 CIRCUIT
P0353-IGNITION COIL #3 CIRCUIT
P0354-IGNITION COIL #4 CIRCUIT
P0355-IGNITION COIL #5 CIRCUIT
P0356-IGNITION COIL #6 CIRCUIT
Test Note: All symptoms listed above are diagnosed using the same tests.
The title for the tests will be P0351-IGNITION COIL #1 CIR-
CUIT.
When Monitored and Set Condition:
P0351-IGNITION COIL #1 CIRCUIT
When Monitored: With battery voltage greater than 11 volts. Engine running. Engine
RPM less than 8160. No coil in dwell during test.
Set Condition: Peak current is not achieved with battery based dwell plus 1.5 msec of
diagnostic offset. It takes less than 3 seconds during cranking or up to 6 seconds while
running to set. One Trip Fault.
P0352-IGNITION COIL #2 CIRCUIT
When Monitored: With battery voltage greater than 11 volts. Engine running. Engine
RPM less than 8160. No coil in dwell during test.
Set Condition: Peak current is not achieved with battery based dwell plus 1.5 msec of
diagnostic offset. It takes less than 3 seconds during cranking or up to 6 seconds while
running to set. One trip Fault.
P0353-IGNITION COIL #3 CIRCUIT
When Monitored: With battery voltage greater than 11 volts. Engine running. Engine
RPM less than 8160. No coil in dwell during test.
Set Condition: Peak current is not achieved with battery based dwell plus 1.5 msec of
diagnostic offset. It takes less than 3 seconds during cranking or up to 6 seconds while
running to set. One Trip Fault.
P0354-IGNITION COIL #4 CIRCUIT
When Monitored: With battery voltage greater than 11 volts. Engine running. Engine
RPM less than 8160. No coil in dwell during test.
Set Condition: Peak current is not achieved with battery based dwell plus 1.5 msec of
diagnostic offset. It takes less than 3 seconds during cranking or up to 6 seconds while
running to set. One Trip Fault.
156