Chrysler Concorde 2004 Service Manual page 797

P0335-CRANKSHAFT POSITION SENSOR CIRCUIT —
TEST
2 Turn the ignition off.
With the DRBIII lab scope probe and the Miller special tool #6801, back probe the
(K44) Camshaft Position (CMP) Sensor Signal circuit in the CMP harness connector.
WARNING: WHEN THE ENGINE IS OPERATING, DO NOT STAND IN A
DIRECT LINE WITH THE FAN. DO NOT PUT YOUR HANDS NEAR THE
PULLEYS, BELTS OR FAN. DO NOT WEAR LOOSE CLOTHING.
Ignition on, engine not running.
Wiggle the related wire harness and lightly tap on the Cam Position Sensor.
Observe the lab scope screen.
Look for any pulses generated by the CMP Sensor.
Start the engine.
Allow the engine to idle.
Observe the lab scope screen.
Did the CMP Sensor generate any erratic pulses?
Yes → Repair as necessary.
→ Go To 3
No
3 Turn the ignition off.
With the DRBIII lab scope probe and the Miller special tool #6801, backprobe the
(K24) CKP Signal circuit in the CKP harness connector.
WARNING: WHEN THE ENGINE IS OPERATING, DO NOT STAND IN A
DIRECT LINE WITH THE FAN. DO NOT PUT YOUR HANDS NEAR THE
PULLEYS, BELTS OR FAN. DO NOT WEAR LOOSE CLOTHING.
Ignition on, engine not running.
Wiggle the related wire harness and lightly tap on the Crank Position Sensor.
Observe the lab scope screen.
Look for any pulses generated by the CKP Sensor.
Start the engine.
Allow the engine to idle.
Observe the lab scope screen.
Did the CKP Sensor generate any pulses?
Yes → Repair as necessary.
→ Test Complete.
No
4 Turn the ignition off.
Disconnect the CKP Sensor harness connector.
Ignition on, engine not running.
Measure the voltage of the (K6) 5 Volt Supply circuit in the CKP Sensor harness
connector.
Is the voltage between 4.5 and 5.5 volts?
Yes → Go To 5
→ Go To 13
No
5 Turn the ignition off.
Disconnect the CKP Sensor harness connector.
Ignition on, engine not running.
Measure the voltage of the (24) CKP Signal circuit in the CKP Sensor harness
connector.
Is the voltage between 4.5 and 5.0 volts?
Yes → Go To 6
→ Go To 8
No
ACTION
Perform POWERTRAIN VERIFICATION TEST VER - 5 - NGC.
Perform POWERTRAIN VERIFICATION TEST VER - 5 - NGC.
DRIVEABILITY - NGC
139
Continued
APPLICABILITY
All
All
All
All