Chrysler Concorde 2004 Service Manual page 139

*KEY IN IGNITION AND DRIVER'S DOOR OPEN CHIME INOPERATIVE
—
Continued
TEST
4 Turn the ignition off.
Disconnect the Ignition Switch harness connector.
Disconnect the Body Control Module C2 harness connector.
Measure the resistance of the Key-In Ignition Switch Sense circuit between the
ignition switch connector and the Body Control Module C2 connector .
Is the resistance below 5.0 ohms?
Yes → Go To 5
→ Repair the Key-In Ignition Switch Sense circuit for an open
No
5 If there are no possible causes remaining, view repair.
Repair
ACTION
Perform BODY VERIFICATION TEST - VER 1.
Replace and program the Body Control Module in accordance with
the Service Information.
Perform BODY VERIFICATION TEST - VER 1.
123
CHIME
APPLICABILITY
All
All