*NO RESPONSE FROM CONTROLLER ANTILOCK BRAKE —
TEST
7
Turn the ignition off.
Disconnect the CAB harness connector.
Disconnect the BCM C3 harness connector.
Measure the resistance of the PCI bus circuit between the CAB connector and the
BCM C3 connector.
Is the resistance below 5.0 ohms?
Yes → Replace the Body Control Module in accordance with the service
→ Repair the PCI Bus circuit for an open.
No
ACTION
information.
Perform ABS VERIFICATION TEST - VER 1.
Perform ABS VERIFICATION TEST - VER 1.
149
COMMUNICATION
Continued
APPLICABILITY
All