Chrysler Concorde 2004 Service Manual page 373

Hide thumbs Also See for Concorde 2004:
Table of Contents

Advertisement

*BRAKE WARNING INDICATOR INOPERATIVE —
TEST
4
Turn the ignition off.
Disconnect the Park Brake Switch harness connector.
Disconnect the Junction Block C7 harness connector.
Measure the resistance of the Red Brake Warning Indicator circuit.
Is the resistance above 5.0 ohms?
Yes → Repair the Red Brake Warning Indicator circuit for an open
→ Go To 8
No
5
Turn the ignition off.
Disconnect the Brake Fluid Level Switch harness connector.
Connect a jumper wire between cavity A and cavity B.
Turn the ignition on.
Did the BRAKE indicator illuminate?
Yes → Replace the Brake Fluid Level Switch in accordance with the
→ Go To 6
No
6
Turn the ignition off.
Disconnect the Brake Fluid Level Switch harness connector.
Measure the resistance between ground and the Brake Fluid Level Switch Ground
circuit.
Is the resistance above 5.0 ohms?
Yes → Repair the Brake Fluid Level Switch Ground circuit for an open.
→ Go To 7
No
7
Turn the ignition off.
Disconnect the Brake Fluid Level Switch harness connector.
Disconnect the Junction Block C10 harness connector.
Measure the resistance of the Red Brake Warning Indicator circuit between the
Switch connector and the Junction Block C10 connector.
Is the resistance above 5.0 ohms?
Yes → Repair the Red Brake Warning Indicator Switch circuit for an
→ Go To 8
No
8
Turn the ignition off.
Disconnect the appropriate Junction Block harness connectors.
Using the wiring diagram/schematic as a guide, measure the resistance of the Red
Brake Warning Indicator circuit through the Junction Block.
Is the resistance above 5 ohms?
Yes → Replace the Junction Block in accordance with the Service Infor-
→ Go To 9
No
ACTION
between the Park Brake Switch and the Junction Block.
Perform BODY VERIFICATION TEST - VER 1.
Service Information.
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
open between the Fluid Level Switch and the Junction Block.
Perform BODY VERIFICATION TEST - VER 1.
mation.
Perform BODY VERIFICATION TEST - VER 1.
INSTRUMENT CLUSTER
357
Continued
APPLICABILITY
All
All
All
All
All

Advertisement

Table of Contents
loading

This manual is also suitable for:

300m 2004Intrepid 2004

Table of Contents