Chrysler Concorde 2004 Service Manual page 257

*PARK LAMPS WILL NOT TURN ON —
TEST
10 Remove the Park Lamp Relay from the junction block.
Measure the resistance of the Park Lamp Relay Output circuit from the relay cavity
55,30 to ground.
Is the resistance below 5.0 ohms?
Yes → Go To 11
No
11 Remove the Park Lamp Relay from the junction block.
Remove the Body Control Module from the junction block.
Measure the resistance of the Park Lamp Relay Output circuit from relay cavity
55,30 to ground.
Is the resistance below 5.0 ohms?
Yes → Repair the Park Lamp Relay Output circuit for a short to ground
No
ACTION
→ Replace the fuse and recheck the system.
Perform BODY VERIFICATION TEST - VER 1.
and replace the fuse.
Perform BODY VERIFICATION TEST - VER 1.
→ Replace the Body Control Module.
Perform BODY VERIFICATION TEST - VER 1.
EXTERIOR LIGHTING
Continued
241
APPLICABILITY
All
All