Fuel Delivery, Return And Evaporation Lines - Subaru Legacy 2004 Service Manual

FUEL INJECTION (FUEL SYSTEMS)

30.Fuel Delivery, Return and Evaporation Lines

A: REMOVAL
1) Set the vehicle on a lift.
2) Release the fuel pressure. <Ref. to FU(H6DO)-39, RELEASING OF FUEL PRESSURE, PROCEDURE,
Fuel.>
3) Open the fuel filler flap lid, and remove the fuel filler cap.
4) Remove the floor mat. <Ref. to EI-73, REMOVAL, Floor Mat.>
5) Disconnect the fuel delivery pipes and hoses, and then disconnect the fuel return pipes and hoses, evap-
oration pipes and hoses.
6) In the engine compartment, disconnect the fuel
delivery hoses, return hoses and evaporation hose.
(A) (B)
(A) Fuel delivery hose
(B) Evaporation hose
7) Lift-up the vehicle.
8) Remove the fuel tank. <Ref. to FU(H6DO)-40,
REMOVAL, Fuel Tank.>
Fuel Delivery, Return and Evaporation Lines
FU-02148
FU(H6DO)-54
9) Separate the quick connector on fuel line.
(1) Clean the pipe and connector, if they are
covered with dust.
(2) To prevent from damaging or entering for-
eign matter, wrap the pipes and connectors with
plastic bag, etc.
(3) Hold the connector and push retainer down.
(4) Pull out the connector from retainer.
FU-02181
FU-01333