COOLING
14) Remove
the
reservoir
CO(H4DOTC)-30, REMOVAL, Reservoir Tank.>
15) Disconnect the radiator inlet hose (A) from ra-
diator.
16) Remove the hood stay holder (B).
17) Disconnect the two coolant filler tank hoses
from radiator.
18) Remove the radiator upper brackets.
19) While lifting the radiator up, slide it to the left.
20) Lift the radiator up and away from vehicle.
Radiator
tank.
<Ref.
(A)
(B)
CO-00255
CO-00256
CO-00040
CO(H4DOTC)-20
to
B: INSTALLATION
1) Attach the radiator lower cushions to holes on
the radiator lower bracket.
2) Install the radiator to vehicle.
NOTE:
Make pins on the lower side of radiator be fitted into
the radiator lower cushions on body side.
3) Install the radiator upper brackets and tighten
the bolts.
Tightening torque:
%
18 N
m (1.8 kgf-m, 13.0 ft-lb)
4) Connect the two coolant filler tank hoses to radi-
ator.
5) Connect the radiator inlet hose (A).
CO-00041
CO-00040
CO-00256