DynaGATE 10-12 User manual Rev. 0-14
16
H
OW TO INSTALL THE PRODUCT
NOTICE
This product must only be installed by qualified personnel.
Install this product in a secured location, only accessible to authorized personnel (for example in a cabinet /
technical compartment).
16.1
Comply with safety instructions, norms and certifications
Always comply with the information and instructions contained in the following sections:
"Safety instructions" on page 7
l
"Norms and certifications" on page 23
l
16.2
How to install the product using the integrated Mounting
Bracket
To install the product in place, add all the necessary mounting hardware to safely secure the product in
place according to your installation requirements (for example use 4x M5 screws).
Material and length of the screws, and the maximum torque applicable, depend on your installation
requirements.
The integrated Mounting Bracket is made of 2 mm aluminum alloy 5052.
16 How to install the product
89 / 94