8 Interfaces in detail
8.14
RTC (Real Time Clock)
The DynaGATE 10-12 includes the following two RTC (Real Time Clocks) devices:
RTC device
/dev/rtc0
/dev/rtc1
8.14.1
The RTC device "/dev/rtc1"
The RTC device "/dev/rtc1" offers three timestamp registers.
8.14.2
The RTC backup supercap
The DynaGATE 10-12 includes a supercap in the Service Panel.
The RTC backup supercap can retain the time-stamp for at least 10 days when the DynaGATE 10-12 is
powered OFF.
8.15
Watchdog
The DynaGATE 10-12 includes a watchdog / supervisor IC, external to the CPU.
8.16
Accelerometer
Your DynaGATE 10-12 includes a 3-axis +/- 8g accelerometer with 12 bit resolution and a programmable
output signal which can trigger an interrupt to the CPU (movement detection).
8.17
The Programmable pushbutton
A programmable pushbutton is available in the Service Panel.
The pushbutton is sensed by a Linux daemon which executes a shell script every time the button is either
pushed or released.
8.18
TPM
The DynaGATE 10-12 includes a TPM 2.0 hw module (Infineon SLB9670).
56 / 94
Description
Internal (in the CPU SoC)
l
External (I2C-based RTC device)
l
Default RTC used by Linux
l
Accuracy: 25 minutes per year (at 25 °C)
l
DynaGATE 10-12 User manual Rev. 0-14
Use
Reserved
Wake up the DynaGATE 10-12 from a deep low power
state