Com Ports 0 And 1 For Dynagate 10-12-Xy With X - Eurotech DynaGate 10-12 Series User Manual

Contents
7 Interfaces overview
7.1 Front side overview
7.2 Rear side overview
7.2.1 Service Panel interfaces
7.3 Right side overview
7.4 Left side overview
7.5 LED indicators overview
8 Interfaces in detail
8.1 Wi-Fi and Bluetooth (only for versions: -X2, -X5, -X6, -X7)
8.1.1 Wi-Fi specifications
8.1.1.1 2.4 GHZ TX output power
8.1.1.2 5 GHZ TX output power
8.1.2 Bluetooth specifications
8.1.3 BLE specifications
8.1.4 Wi-Fi and Bluetooth antennas connectors specifications
8.2 Internal mobile connectivity (only for versions: -X3, -X4, -X5, -X6, -X7)
8.2.1 Internal modem specifications (according to product versions)
8.2.1.1 Product features
8.2.1.2 LTE data
8.2.1.3 Supported bands
8.2.1.4 TX output power
8.2.1.5 Main antenna requirements
8.2.1.6 Second antenna requirements (for antenna diversity)
8.2.2 Internal mobile antennas connectors specifications
8.3 The MicroSIM card receptacles
8.3.1 How to insert / remove the MicroSIM card
8.3.1.1 If you are using the receptacle on the top side of the circuit board
8.3.1.2 If you are using the receptacle on the bottom side of the circuit board
8.4 Internal GNSS
8.4.1 Internal GNSS specifications
8.4.2 Internal GNSS antenna connector specifications
8.5 Digital I/Os
8.5.1 Insulated Digital Inputs
8.5.1.1 Electrical specifications
8.5.1.2 Electrical schematics
8.5.2 Insulated Digital Outputs
8.5.2.1 Electrical specifications
8.5.2.2 Electrical schematics
8.5.3 Digital I/Os connector specifications
8.6 COM ports 0 and 1 for DynaGATE 10-12-XY with X ≤ 3
8.6.1 Note for termination resistors (only for RS-485 mode)
8.6.2 Note for fail safe resistors (only for RS-485 mode)
8.6.2.1 Switches meaning
8.6.3 COM connector specifications
8.7 COM ports 0 and 1 for DynaGATE 10-12-XY with X ≥ 4
8.7.1 Note for termination resistors (only for COM 1 in RS-485 mode)
8.7.2 Note for fail safe resistors (only for COM 1 for RS-485 mode)
8.7.2.1 Switches meaning
8.7.3 COM connector specifications
8.7.4 Note for RS-485 Half Duplex (only for COM 0 in RS-485 mode)
8.8 CAN ports 0 and 1
8.8.1 CAN 0/1 connector specifications
8.9 Ethernet ETH 0 and 1
8.9.1 Ethernet specifications
8.9.2 ETH 0/1 connectors specifications
4 / 94
DynaGATE 10-12 User manual Rev. 0-14
29
29
30
31
32
33
34
35
35
35
35
35
36
36
36
37
37
37
37
37
37
38
39
40
41
41
41
42
43
43
43
44
44
44
44
45
45
45
45
46
46
46
46
47
48
48
48
48
49
49
50
50
51
51
51