Intended Use And Not Allowed Uses Of The Product; Intended Use; Not Allowed Uses - Eurotech DynaGate 10-12 Series User Manual

5 Product overview
5.2

Intended use and not allowed uses of the product

NOTICE
Install this product in a secured location, only accessible to authorized personnel (for example
in a cabinet / technical compartment).
This product is intended for professional use and must only be installed by qualified personnel.
5.2.1

Intended use

The DynaGATE 10-12 is a family of IoT Edge Gateways designed to deliver LTE connectivity with 2G/3G
fallback to automotive and lightly rugged applications.
The DynaGATE 10-12 must:
Be installed in a secured location, only accessible to authorized personnel (for example in a cabinet
l
/ technical compartment), and not exposed to atmospheric agents
Be used indoors or in automotive applications*
l
Be used with appropriate interconnecting and power cables
l
Be used with an external DC power supply source that:
l
Include an external 2 A fuse on the line coming from the negative terminal of the DC power source.
l
* Before using the DynaGATE 10-12, versions: -X2, -X5, -X6, in automotive applications in any EU
Member State, switch-off the Wi-Fi band: 5150 - 5350 MHz.
5.2.2

Not allowed uses

Do not use the DynaGATE 10-12:
In railway applications
l
In defence applications
l
In industrial applications
l
In safety-critical applications
l
In environments with potentially explosive atmospheres
l
If not installed according to the instructions and warnings contained in this document.
l
When used in automotive applications in any EU Member State, do not use the DynaGATE 10-12,
versions: -X2, -X5, -X6, with the Wi-Fi band: 5150 - 5350 MHz enabled.
18 / 94
Must meet the requirements stated on the identification label of the product
o
Must deliver a maximum current of 2 A
o
Must include an external 2 A fuse on the line coming from the negative terminal
o
DynaGATE 10-12 User manual Rev. 0-14