DynaGATE 10-12 User manual Rev. 0-14
8.9
Ethernet ETH 0 and 1
The DynaGATE 10-12 provides 2x 10/100 Mbps Ethernet ports for wired network connectivity:
ETH 0
l
ETH 1
l
The ETH 0/1 connectors are available on the rear side.
8.9.1
Ethernet specifications
Feature
Network Standard
Speeds
Notes
8.9.2
ETH 0/1 connectors specifications
Connector Layout:
1
Connector Specifications:
RJ-45 socket
l
Gender: Female
l
Mating Connector Specifications:
RJ-45 plug
l
Gender: Male
l
Description
IEEE 802.3u 10/100-BaseTX.
IEEE 802.3x full-duplex flow control.
10/100-BaseTX interfaces with MAC
The interfaces are noise and surge protected.
The RJ-45 connector has integrated magnetics.
Connector Pinout (pins not listed are not connected):
Pin #
1
2
3
6
Signal
Type Description
TX+
O
TX-
O
RX+
I
RX-
I
8 Interfaces in detail
Transmit Data +
Transmit Data -
Receive Data +
Receive Data -
51 / 94