Can Ports 0 And; Can 0/1 Connector Specifications - Eurotech DynaGate 10-12 Series User Manual

8 Interfaces in detail
8.8

CAN ports 0 and 1

The DynaGATE 10-12 provides 2x CAN (Controller Area Network) ports compliant with the CAN
Specification 2.0, Parts A and B:
CAN 0
l
CAN 1
l
The CAN 0/1 connectors are available on the front side.
Notes about CAN power supply:
The DynaGATE 10-12 can supply power to the 2 CAN ports: 100 mA @ 5V (each port)
l
CAN power can be enabled / disabled by software
l
The interfaces are surge protected.
l
8.8.1

CAN 0/1 connector specifications

Connector Layout:
1
Connector Specifications:
Base strip, Header
l
Gender: Male
l
Type: 8-pin, 3.5 mm pitch
l
Mating Connector Specifications:
Pluggable screw terminal block;
l
Gender: Female
l
Type: 8-pin, 3.5 mm pitch
l
Example:
l
Manufacturer: Phoenix Contact
Part Number: MC 1,5/ 8-STF-3,5 - 1847181
(or equivalent)
50 / 94
Connector Pinout:
Pin #
1
8
2
3
4
5
6
7
8
DynaGATE 10-12 User manual Rev. 0-14
Signal Type Description
CAN 0: H IO CAN port 0 Positive Data
CAN 0: L IO CAN port 0 Negative Data
CAN 0: 5V 5 CAN node 0
5 V Output power supply
CAN 0: GND P Ground
CAN 1: H IO CAN port 1 Positive Data
CAN 1: L IO CAN port 1 Negative Data
CAN 1: 5V 5 CAN node 1
5 V Output power supply
CAN 1: GND P Ground