DynaGATE 10-12 User manual Rev. 0-14
8.4
Internal GNSS
The DynaGATE 10-12 provides the following GNSS functionality:
DynaGATE 10-12-XY versions
X ≤ 3
X ≥ 4
The GNSS outputs NMEA data which can be read by applications directly.
The GNSS antenna connector is placed on the front side.
8.4.1
Internal GNSS specifications
Receiver type:
72-channel engine
l
GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1
l
SBAS L1 C/A: WAAS, EGNOS, MSAS
l
Galileo-ready E1B/C
l
Nav. update rate:
Single GNSS: up to 18 Hz
l
Concurrent GNSS: up to 10 Hz
l
Position accuracy:
2.0 m CEP
l
Acquisition:
Cold starts: 26 s
l
Aided starts: 3 s
l
Reacquisition: 1 s
l
Sensitivity:
Tracking & Nav: -160 dBm
l
Cold starts: -148 dBm
l
Hot starts: -156 dBm
l
8.4.2
Internal GNSS antenna connector specifications
Connector Layout:
1
Connector Specifications:
SMA connector
l
Gender: Female
l
Mating Connector Specifications:
SMA connector
l
Gender: Male
l
GNSS functionality
Internal; 72 channels GPS, Galileo, GLONASS, BeiDou
Internal Untethered Dead Reckoning; 72 channels GPS, Galileo, GLONASS, BeiDou
2
Connector Pinout:
Pin #
Description
1
Female inner pin contact
2
Female connector body (outer thread)
8 Interfaces in detail
43 / 94