Safety Instructions; Safety Messages; Safety Messages For Hazards With A High Level Of Risk - Eurotech DynaGate 10-12 Series User Manual

DynaGATE 10-12 User manual Rev. 0-14
1 S
AFETY INSTRUCTIONS
IMPORTANT: Read carefully and understand the instructions and warnings contained in this
document before installing / using the product. Keep this document for future reference.
To lower the risk of personal injury, electric shock, fire or damage to equipment, observe the instructions
and warnings contained in this document.
Failure to comply with the instructions and warnings contained this document, violates the standards of
safety, design, manufacture, and intended use of the product.
Eurotech assume no liability for any damage caused by failure to observe the instructions and warnings
contained this document.
Whenever you have any doubt regarding the correct understanding of this document, contact the Eurotech
Technical Support (for more information see
1.1

Safety messages

1.1.1

Safety messages for hazards with a high level of risk

To indicate a hazard with a high level of risk which, if not avoided, will result in death or serious injury,
the following safety message is used; the message also contains the safety instructions to follow to avoid
any hazard:
DANGER
WARNING
SIGN
Example:
DANGER
TEXT THAT EXPLAINS THE SOURCE OF THE HAZARD
(WRITTEN WITH BOLD UPPER-CASE CHARACTERS)
Text with the safety instructions to follow to avoid any hazard
(written with bold lower-case characters)
HIGH VOLTAGE INSIDE.
CONTACT WILL CAUSE ELECTRIC SHOCK OR BURN.
Turn OFF and disconnect power before opening the rack.
"Receiving technical assistance" on

1 Safety instructions

page 11).
7 / 94