Getting Started - Eurotech DynaGate 10-12 Series User Manual

DynaGATE 10-12 User manual Rev. 0-14
4 G
ETTING STARTED
To get started with the DynaGATE 10-12, follow these steps:
1. Know the DynaGATE 10-12 interfaces.
The DynaGATE 10-12 provides connectivity to several wired and wireless interfaces.
For further information, see:
2. Supply power to the DynaGATE 10-12.
Supply power to the DynaGATE 10-12 correctly, respecting all the safety instructions.
For further information, see
3. Log into the Administration console.
The DynaGATE 10-12 runs a Linux distribution based on a Yocto framework and supports login via
a variety of methods.
For further information, see:
4. Start developing your applications.
The DynaGATE 10-12 supports ESF, which is an inclusive software framework that puts a
middleware layer between the operating system and the OEM application.
For detailed instructions, and sample applications for developing device applications using ESF on
Eurotech platforms, see: http://esf.eurotech.com/docs.
5. Install the DynaGATE 10-12.
The DynaGATE 10-12 is lightweight, compact, and easy to install.
For further information, see:
6. Maintain the DynaGATE 10-12.
Periodic maintenance of the DynaGATE 10-12 ensures greater integrity and reliable operation.
For further information, see:
"Product overview" on page 17
l
"Technical specifications" on page 19
l
"Interfaces overview" on page 29
l
"Interfaces in detail" on page 35
l
"The Software" on page 61
l
"How to log in the Administration Console" on page 79
l
"How to access interfaces under Linux" on page 63
l
"Mechanical specifications" on page 87
l
"How to install the product" on page 89
l
"How to maintain the product" on page 91
l
"How to supply power to the product" on page 57

4 Getting started

15 / 94