Table of Contents
Advertisement
DynaGATE 10-12 User manual Rev. 0-14
8
I
NTERFACES IN DETAIL
8.1
Wi-Fi and Bluetooth (only for versions: -X2, -X5, -X6, -X7)
The DynaGATE 10-12 provides the following Wi-Fi / Bluetooth functionality:
2.5 GHz Wi-Fi 802.11a,b,g,n / BLE 4.2 BLE Bluetooth
l
5 GHz Wi-Fi 802.11a,b,g,n
l
The internal circuitry allows for 2.5 GHz Wi-Fi and Bluetooth coexistence.
The Wi-Fi and Bluetooth antennas connectors are placed on the front side.
8.1.1
Wi-Fi specifications
Integrated 2.4 & 5G GHz Power Amplifier (PA) for WLAN solution
l
WLAN Baseband Processor and RF transceiver Supporting IEEE Std 802.11a/b/g/n
l
WLAN 2.4/5 GHz SISO (20/40 MHz channels)
l
Baseband Processor
l
Fully calibrated system. Production calibration not required
l
Medium Access Controller (MAC)
l
IEEE Std 802.11d,e,h,i,k,r PICS compliant
l
New advanced co‐ existence scheme with BT/BLE
l
2.4/5 GHz Radio
l
Supports 4 bit SDIO host interface, including high speed (HS) and V3 modes.
l
8.1.1.1
2.4 GHZ TX output power
Maximum RMS output power measured at 1dB from IEEE spectral mask or EVM.
Parameter
Operation frequency range
Output Power
8.1.1.2
5 GHZ TX output power
Maximum RMS output power measured at 1dB from IEEE spectral mask or EVM.
Parameter
Operation frequency range
Output Power
IEEE Std 802.11a/b/g/n data rates and IEEE Std 802.11n data rates with 20 or 40 MHz
o
SISO
Embedded ARM™ Central Processing Unit (CPU)
o
Hardware‐ Based Encryption/Decryption using 64‐ , 128‐ , and 256‐ Bit WEP, TKIP or AES
o
Keys
Supports requirements for Wi‐ Fi Protected Access (WPA and WPA2.0) and IEEE Std
o
802.11i (includes hardware‐ accelerated Advanced Encryption Standard (AES))
Designed to work with IEEE Std 802.1x
o
Internal LNA and PA
o
Supports: IEEE Std 802.11a, 802.11b, 802.11g and 802.11n
o
Value
2412 to 2484 MHz
17 dBm @ condition: 1 Mbps DSSS
Value
4910 to 5825MHz
16.8 dBm @ condition: 6 Mbps OFDM
8 Interfaces in detail
35 / 94
Advertisement
Table of Contents
