How To Turn Off The Product; How To Reduce The Power Consumption Of The Product; How To Perform A Hardware Reset Of The Product - Eurotech DynaGate 10-12 Series User Manual

DynaGATE 10-12 User manual Rev. 0-14
9.3

How to turn OFF the product

To turn the DynaGATE 10-12 OFF follow these steps:
1. Login the Administration console and run the shutdown command. The system turns itself OFF
2. Disconnect the DC power source terminals to the Power IN connector.
9.4

How to reduce the power consumption of the product

To reduce the power consumption of the DynaGATE 10-12, turn OFF the radio interfaces and disable
unnecessary services that contribute to overall system power consumption.
9.5

How to perform a hardware reset of the product

To trigger a hardware reset of the DynaGATE 10-12 push the reset pushbutton available in the Service
Panel.
9 How to supply power to the product
59 / 94