The Microsim Card Receptacles; How To Insert / Remove The Microsim Card; If You Are Using The Receptacle On The Top Side Of The Circuit Board - Eurotech DynaGate 10-12 Series User Manual

DynaGATE 10-12 User manual Rev. 0-14
8.3

The MicroSIM card receptacles

The DynaGATE 10-12 includes the following MicroSIM card receptacles in the Service Panel:
1st MicroSIM card receptacle:
2nd MicroSIM card receptacle:
NOTICE
TURN THE SIM PIN OFF BEFORE INSERTING THE SIM CARD IN THE RECEPTACLE.
THE MOBILE CONNECTION WILL NOT WORK IF THE SIM PIN IS ON.
8.3.1

How to insert / remove the MicroSIM card

8.3.1.1

If you are using the receptacle on the top side of the circuit board

To insert the MicroSIM card, push it in the holder with the contacts facing down, and the cut corner facing
inwards:
To remove the MicroSIM card, pull the eject lever towards yourself: use a pen tip to simplify the operation:
Integrated in a Combo MicroSD + MicroSIM cards receptacle (pull-
lever) on the top side of the circuit board
On the bottom side of the circuit board (push-pull)
8 Interfaces in detail
41 / 94