Intended Use And Not Allowed Uses Of The Product; Intended Use; Not Allowed Uses - Eurotech DynaGATE 10-06 User Manual

6 Product overview
6.2

Intended use and not allowed uses of the product

The product is intended for professional use and must be installed by qualified personnel only.
The product must be installed in a secured location, accessible to authorized personnel only (for
example in a cabinet / technical compartment).
6.2.1

Intended use

The DynaGATE 10-06 is a Multi-service IoT Edge Gateway, designed to deliver LTE connectivity with
2G/3G fallback to automotive and lightly rugged applications.
The DynaGATE 10-06 must:
Be installed in a secured location, only accessible to authorized personnel (for example in a cabinet
l
/ technical compartment), and not exposed to atmospheric agents
Be used indoors, in industrial or automotive* applications
l
Be used with appropriate interconnecting and power cables
l
Be used with an external DC power supply source that:
l
Include an external 2 A fuse on the line coming from the negative terminal of the DC power source.
l
* For DynaGATE 10-06 versions -33 to -37: before using the DynaGATE 10-06 in automotive applications
in any EU Member State, switch-off the Wi-Fi band: 5150 - 5350 MHz.
6.2.2

Not allowed uses

Do not use the DynaGATE 10-06:
In railway applications
l
In defence applications
l
Outdoors
l
In safety-critical applications
l
In environments with potentially explosive atmospheres
l
Exposed to water, chemical agents, and UV
l
If not installed according to the instructions and warnings contained in this document.
l
When used in automotive applications in any EU Member State, do not use the DynaGATE 10-06,
versions -33 to -37, with the Wi-Fi band: 5150 - 5350 MHz enabled.
20 / 72
Must meet the requirements stated on the identification label of the product
o
Must deliver a maximum current of 2 A
o
DynaGATE 10-06 User manual Rev. 0-8