Customer On/Off - Samsung DCS-816 Programming Manual

SAMSUNG
DCS-816
MMC: 210
DESCRIPTION:
Allows the system administrator to set in system features. Each system option
has a corresponding dialling number, as listed below. All options toggle ON/OFF.
0
1
3
4
5
6
7
8
9
10
11
13. VPN ENABLE
DISA PSWD
LCR ENABLE
PERI UCD SET
CID CODE INS
DISA MOH
TRANSFER MOH
DSP SSPDNAME
DID BSY ROUT
DID NOT ROUT
ALL PICK UP
ARD TONE CHK

CUSTOMER ON/OFF

Determine whether outside customers are required to
enter DISA password (Yes=ON, No=OFF).
Enables LCR feature in the system.
Periodic UCD information provider. Enables UCD
statistics data on a per UCD group basis to print out
on the I/O port which has been set as SMDR or UCD
REPT in real time (every 10 seconds). This allows
extended manipulation of the information by an
external third–party–providedsoftware package.
Allows the digit ' 1' to be automatically inserted for a
toll call.
An additional option that can be presented to outside
DISA callers: a variable indication provided by an
MOH source instead of a fixed DISA dial tone.
Callers who have been transferred from an extension
or ACD group or AA group will hear MOH, until
answered by the called extension, instead of transfer
dial tone.
LCD displays programmed name of SYSTEM SPEED
bin (in MMC 706) if it has been programmed; if not, it
shows digits programmed in MMC 705 even if this is
set to ON.
Busy DDI call can be routed to an assigned
destination, in MMC 406, before the call is dropped
out.
Not used DDI call can be routed to an assigned
destination, in MMC 406, before the call is dropped
out.
Independent pick up group, can pick up all calls.
When system detects CO BUSY TONE from Central
Office, returns to autoredial state.
Allows use of VPN (Virtual Private Network) feature
linked with network.
MMC 210 (Page 1 of 2)
Programming
February, 1999