Samsung DCS-816 Programming Manual page 109

SAMSUNG
DCS-816
MMC: 414
DESCRIPTION:
Used on a per-trunk basis to define if a C.O. line is to be either a Metering Pulse (MPD) or a
Polarity Reversal Signal (PRS) trunk.
A Meter Pulse Trunk will detect a C.O.-provided meter pulse. A Polarity Reversal trunk will
detect the line reversal signal which may be provided by the C.O. when the other party
answers the outgoing call or the outside party clears the call. If the trunk is designated as PRS
detection, the call duration timer will be started and the results printed on the SMDR record.
PRS detection is also essential for dropping a trunk-to-trunk conversation which is
unsupervised by an internal party.
There are three types of PRS mode: PRS1, PRS2 and PRS3.
PRS1:When first PRS is detected, call duration timer is started.
When second PRS is detected, call duration timer is stopped.
The call is not released until hanging on.
PRS2:When first PRS is detected, call duration timer is started.
When second PRS is detected, call duration timer is stopped
and call is released. (ROA type in Australia)
PRS3:The call duration timer starts base on the timer.
When first PRS is detected, call duration timer is stopped
and call is released. (ROI type in Australia)
ACTION
1. Press TRSF 414
Display shows
2. Enter desired trunk number (e.g. 705)
OR
Press UP or DOWN key to select trunk and use
LEFT or RIGHT soft key to move cursor
3. Dial 0 for PRS1, 1 for PRS2, 2 for PRS3, 3 for MPD
or 4 for NONE
OR
Press UP or DOWN key to scroll through options and
use LEFT or RIGHT soft key to return to step 2
4. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: None
RELATED ITEMS: MMC 508 Call Cost
MPD/PRS SIGNAL
DISPLAY
[701] TRK PRS
MPD
[705] TRK PRS
MPD
[705] TRK PRS
PRS1
MMC 414 (Page 1 of 1)
Programming
February, 1999