Samsung DCS-816 Programming Manual page 110

SAMSUNG
DCS-816
MMC: 415
DESCRIPTION:
Allows the system administrator or technician to enable or disable the reporting of
abandoned C.O. calls for which CLIP information has been collected on a per–
trunk basis. There are two options for this MMC:
0 REPORT : NO
1 REPORT : YES Abandoned call records for incoming calls with CLIP
NOTE
In order for these abandoned call records to print on SMDR, in MMC 725, SMDR Options, Option
11 – Abandon Call – must be set to YES.
ACTION
1. Press TRSF 415
2. Dial trunk number (e.g. 705)
3. Dial 1 for YES or 0 for NO
4. Press TRSF to store and exit
DEFAULT DATA : All trunks will report data
RELATED ITEMS: MMC 119 Set CLIP Display
REPORT TRUNK ABANDON DATA
Abandoned call records for incoming calls with CLIP
information will not be printed on SMDR or stored in the
system call abandon list.
These records will continue to be stored in the station review
list.
information will be printed on SMDR or stored in the system
call abandon list. These records will also to be stored in the
station review list.
Display shows
OR
Press UP or DOWN to select trunk and use
LEFT or RIGHT soft key to move cursor
OR
Press UP or DOWN to scroll through options
and use LEFT or RIGHT soft key to return to
step 2
OR
Press SPK to store and advance to next MMC
MMC 312 Allow CLIP
MMC 608 Assign CLIP Review Block
MMC 725 SMDR Options
MMC 728 CLIP Translation Table
MMC 415 (Page 1 of 1)
Programming
February, 1999
DISPLAY
[701] TRK ABNDN
REPORT : YES
[705] TRK ABNDN
REPORT : YES
[705] TRK ABNDN
REPORT : NO