Samsung DCS-816 Programming Manual page 134

SAMSUNG
DCS-816
MMC: 503
DESCRIPTION:
Allows certain trunk timer values to be changed on a per–trunk basis or for all
trunks. It is not advisable to change these values (with the exception of trunk flash
time) without assistance from Technical Support.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
ANS/RLS
ACTION
1. Press TRSF 503
Display shows
2. Dial trunk number (e.g., 704)
OR
Press UP or DOWN key to select trunk and
press RIGHT soft key to move cursor
OR
Press ANS/RLS to select all trunks and press
RIGHT soft key to move cursor
3. Dial timer number from above list
OR
Press UP or DOWN key to select timer and press
RIGHT soft key to move cursor
DIAL TIMER
0 ANS.BAK TM
1 CLEARING
2 CO SUPV TM
3 DTMF DUR.
4 F–DGT DELY
5 FLASH TIME
6 NO RING TM
7 PAUSE TIME
8 PRS DET TM
9 RNG DET.TM
10 WINK TIME
11 MF/DP INT
12 MFR DLY TM
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to select ALL
TRUNK–WIDE TIMERS
RANGE
100–2500 MSEC
01–25 SEC
100–2500 MSEC
100–2500 MSEC
100–2500 MSEC
100–2500 MSEC
001–255 SEC
001–255 SEC
000–2500 MSEC
100–2500 MSEC
100–300 MSEC
100–9900 MSEC
00–25 SEC
MMC 503 (Page 1 of 2)
Programming
February, 1999
DISPLAY
[701] ANS.BAK TM
0600 MS →
[704] ANS.BAK TM
0600 MS →
[ALL] ANS.BAK TM
0600 MS →
[704] DTMF DUR.
0600 MS →_