Samsung DCS-816 Programming Manual page 202

SAMSUNG
DCS-816
MMC: 725
DESCRIPTION:
Allows the system administrator to select the information printed on the
SMDR report. The following options may be selected to print on SMDR:
0.PAGE HEADER
1.LINE PER PAGE
2.INCOMING CALL
3.OUTGOING CALL
4.AUTHORISE CODE Determines whether authorisation codes print on
5.SMDR START TIME Determines whether valid calls will include the
6.IN/OUT GROUP
7.DND CALL
8.WAKE–UP CALL
9.DIRECTORY NAME Allows the system administrator to enter a 16–
10. CALLER ID DATA
11. ABANDON CALL
13. NO. OF DIAL MASK Determines whether number of masked dial
SMDR OPTIONS
Determines whether a page header prints at the
top of each page. This would normally be turned
off if SMDR is being sent to a call accounting
machine.
Selects the length of each page to determine
when to print the SMDR header. The number of
lines is in the range 01–99.
Determines whether incoming calls print on
SMDR.
Determines whether outgoing calls print on
SMDR.
SMDR.
minimum call time in total call duration.
Allows a message, IN GROUP or OUT GROUP,
to be printed in the Digits Dialled column each
time a station enters or leaves a group.
Allows a message, DND ON or DND OFF, to be
printed in the Digits Dialled column each time a
station enters or leaves DND.
Determines whether stations receiving an alarm
reminder call print on SMDR.
character name which will appear on the SMDR
header.
Can be selected to print CLIP data received
from the C.O. on incoming ISDN calls. This
option requires the use of a 132–column printer
or an 80–column printer set for condensed print.
If this option is set to YES, unanswered calls will
print on SMDR.
digits print on SMDR.
MMC 725 (Page 1 of 4)
Programming
February, 1999