Isdn Te (Isdn Phone, G4 Fax, Etc) (Figure 6-5) - Samsung DCS-816 Programming Manual

SAMSUNG
DCS-816

6.6 ISDN TE (ISDN phone, G4 FAX, etc) (Figure 6-5)

ISDN Terminal Equipment can be connected to any circuit on the BRI card if installed.
described in section 5.4, the system provides So as well as To application on a port basis. The
system requires MDF connection for a BRI card and the connection can be made through the
champ connector. See Figure 2-3 and refer to section 2.5 (MDF Cabling).
Use two pair twisted wires and connect each ISDN TE to the BRI port of your choice via the
champ connector on the base board.
Note that the DCS Compact BRI card does not provide power to the ISDN terminal equipment.
25 PAIR CABLE WITH FEMALE CONNECTOR TO THE BASE CHAMP CONNECTOR
ISDN TEs
CONNECTING ISDN TE
CHAMP CONNECTION
PIN COLOUR
28/ 3 W-GR/ GR-W
29/ 4 W-BR/ BR-W
30/ 5 W-S/ S-W
31/ 6 R-BL/ BL-R
32/ 7 R-O/ O-R
33/ 8 R-GR/ GR-R
34/ 9 R-BR/ BR-R
35/10 R-S/ S-R
² CONNECT ISDN TE TO ANY BRI PORT WHEN A
BRI CARD IS INSTALLED
² NO POWER SUPPLY TO ISDN TE
6-6
February, 1999
CIRCUITS/ FUNCTIONS
st
T/R, TX of 1 BRI port
st
T/R, RX of 1 BRI port
nd
T/R, TX of 2 BRI port
nd
T/R, RX of 2 BRI port
rd
T/R, TX of 3 BRI port (4BRI)
rd
T/R, RX of 3 BRI port (4BRI)
th
T/R, TX of 4 BRI port (4BRI)
th
T/R, RX of 4 BRI port (4BRI)
FIGURE 6-5
Installation
As