Samsung DCS-816 Programming Manual page 187

SAMSUNG
DCS-816
MMC: 716
DESCRIPTION
This MMC provides UK LCR options. Before using this MMC, make sure you have
successfully run MMC 812 to set the country code.
0 NETWORK CODE
1 PIN CODE
2 CCC OPTION
3 STATION PIN NO
NOTE: The second entry may be selected as a primary secondary network. By
default, this is 132 (MCL Digital Access). If dialled digits are not matched to the
entry in the LCR DIGIT TABLE (MMC 710) and start with 0, the network code in
the second entry will be dialled out by the system prior to transmitting dialled digit.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ACTION
1. Press TRSF 716
Display shows
2. Enter item number (e.g., 1)
OR
Press UP or DOWN key to make selection and press
RIGHT soft key.
UK LCR OPTION
Provides secondary network access code when the
call is routed to the secondary network. 16 entries
maximum (each 10 digits maximum in length).
Assigns PIN code used when the call is routed to
secondary 131 MCL network.
Selects Call Cost Option and is related only to 131
Mercury service.
Assigns individual users to selected PIN codes in the
system.
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
MMC 716 (Page 1 of 2)
Programming
February, 1999
DISPLAY
NETWORK CODE
1:
PIN CODE
1: