Samsung DCS-816 Programming Manual page 175

SAMSUNG
DCS-816
MMC: 710
DESCRIPTION:
The LCR DIGIT TABLE contains all numerical digits for the completion of outgoing
call placement. This table works in conjunction with LCR ROUTE TABLE, LCR
TIME TABLE and LCR MODIFY DIGITS TABLE. There is a maximum of 300
entries with a digit string length of 10 numerical digits. This system automatically
maintains entered digit strings in numerical order. The characters Q and # are also
accepted for use with feature codes.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ACTION
1. Press TRSF 710
Display shows
2. Dial LCR entry (e.g., 005)
OR
Press UP or DOWN to select entry and press
RIGHT soft key to move cursor
3. Enter LCR digit string via the dial keypad and
press RIGHT soft key
OR
Press LEFT soft key to return to step 1
4. Enter digit length (00–31)
Cursor will move to RT (route selection)
Enter RT (1–16)
OR
Press LEFT soft key to return to length value
Valid entry will return you to step 1
5. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA:
RELATED ITEMS: MMC 712 LCR Route Table
LCR DIGIT TABLE
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
001:01426
004:0345
007:1
010~016:3~9
MMC 710 (Page 1 of 1)
DISPLAY
LCR DIGIT (001)
DIGIT:
LCR DIGIT (005)
DIGIT: _
LCR DIGIT (005)
DIGIT:305426
LCR DIGIT (005)
LENGTH:10 RT:01
002:01459
005:0800
008:121
Programming
February, 1999
003:01893
006:0941
009:2