Create Programmed Station Messages; Message - Samsung DCS-816 Programming Manual

SAMSUNG
DCS-816
3. If the selected station has no speed dial bins, this
display will be shown and a new station may be
selected
4. Dial the speed dial location (e.g., 05)
OR use UP or DOWN to scroll through the location
numbers and use the right soft key to move the cursor
OR press the left soft key to return to step 2
5. Enter the name using the procedure in Program
Station Names (above) and press the right soft key to
return to step 2
OR press the left soft key to return to step 3
6.
Press the F key to access Program Personal Speed
Dial Numbers For Other Stations (above)
OR press TRSF to store and exit programming
OR press SPK to store and advance to the next
program

3.11 CREATE PROGRAMMED STATION MESSAGES

Messages 1-10 are programmed from the factory and cannot be changed. However, you
can create 10 additional 16-character messages (11-20) that fit your company's needs.
After programming these messages, inform other employees so they can add the new
messages to the list on the back of their user guides.
PROGRAM KEYS
UP & DOWN
KEYPAD
HOLD
Open customer programming and follow the instructions below.
OPERATION
1.
Press TRSF 715
2.
Dial in the message number (e.g., 11)
OR press UP or DOWN to make the selection and
press the right soft key to move the cursor
3. Enter in the message using the procedure in Program
Station Names (above) and press the right soft key to
return to step 2 above
Select the message number.
Used to enter characters.
Press to clear entry.
3 - 10
System Administration and Special Features Guide
[205] SPEED DIAL
SPDBLK NOT EXIST
[205] SPEED NAME
01 : _
[205] SPEED NAME
01 : SAM SMITH
PGM MESSAGE (01)
IN A MEETING
MGM MESSAGE (11)
_
PGM MESSAGE (11)
IN THE SHOWROOM
February, 1999