Samsung DCS-816 Programming Manual page 165

SAMSUNG
DCS-816
MMC: 703
DESCRIPTION:
Provides a way to make toll restriction very easy and flexible. There are 200
allowable entries in the allow table and each entry index can be assigned to a class
of service. Each index can have up to 12 digits. With the use of wild cards (MMC
704 Assign Wild Character), more flexibility can be built into toll restriction. There
are six toll levels, B to G, that are programmable. Toll level A is set as unrestricted
by default, and toll level H is set as in–house only by default.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
WILD CARD KEY
ACTION
1. Press TRSF 703
Display shows
2. Dial in index number 001–200 (e.g., 005)
OR
Press UP or DOWN key to select index and press
RIGHT soft key to move cursor and enter toll
pattern
via dial pad (e.g., 212)
OR
Enter wild card (e.g., 21X) from above list and
press RIGHT soft key to move cursor to COS
options.
3. Press UP or DOWN key to move cursor along line
until under toll class mark (e.g., E)
Enter a 1 for YES or 0 for NO and press RIGHT
soft key to return to step 1
OR
Press LEFT soft key to return to step 2
TOLL ALLOWANCE TABLE
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
BUTTON DIAL
19 0
20 1
21 2
WILD CARD
X
Y
Z
MMC 703 (Page 1 of 2)
Programming
February, 1999
DISPLAY
ALOW(001):BCDEFG
:0 0 0 0 0 0
ALOW(005):BCDEFG
:0 0 0 0 0 0
ALOW(005):BCDEFG
212 :0 0 0 0 0 0
ALOW(005):BCDEFG
21X :0 0 0 0 0 0
ALOW(001):BCDEFG
212 :0 0 0 1 0 0