Samsung DCS-816 Programming Manual page 200

SAMSUNG
DCS-816
ACTION
1. Press TRSF 724
Display shows
2. Enter option number 0–7 (e.g., 6)
OR
Press UP or DOWN key to make selection and
press RIGHT soft key.
3. Using table above, press dial keypad number to
make selection
OR
Press UP or DOWN key to make selection and
press RIGHT soft key to advance cursor
4. Enter digits (e.g., 68) via dial keypad
5. Press LEFT soft key to enter change and
continue to make changes
OR
Press RIGHT soft key to enter and return to step
2
If an error message appears indicating
duplication of access code:
Enter 1 for YES for change or 0 for NO for no
change
6. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA:
STN DIAL NUM :
TRK DIAL NUM :
AA DIAL NO :
MISC DIAL NUM :
STNG DIAL NUMBER :
TRKG DIAL NUMBER :
FEAT DIAL NUMBER :
ABAND
ABS
ACCT
ALMCLR
AUTH
BARGE
BLOCK
BOSS
MMC 724 (Page 2 of 3)
DISPLAY
STN DIAL NUMBER
BASE01:201 →
FEAT DIAL NUMBER
AAPLAY:NONE →
FEAT DIAL NUMBER
DICT
FEAT DIAL NUMBER
DICT :NONE→68
SAME DIAL EXIST
CHANGE? Y:1,N:0
201 ~ 216
701 ~ 708 (710: for Australia)
AA : 381 ~ 384
External page: 361
BGM : 371
Common bell : None
Loud bell : None
500 ~ 509
9, 80 ~ 82
64
None
47
57
[
None
None
None
Programming
February, 1999
:NONE→_