Samsung DCS-816 Programming Manual page 176

SAMSUNG
DCS-816
MMC: 711
DESCRIPTION:
This table gives the flexibility to the system, through the LCR ROUTES, to allow
calls placed at any given time of day to use the least cost trunk route that is
available. When LCR ROUTE ADVANCE is allowed, it is possible for calls to be
placed on more expensive trunks on any given time of day. There are four possible
time entries per day; the start time of the next time period is the end time of the
previous time period.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
FEATURE KEYS
DAY
SUN
MON
TUE
WED
THU
FRI
SAT
ACTION
1. Press TRSF 711
Display shows
2. Dial day of week (SUN–SAT, e.g., WED)
OR
Press UP or DOWN to make day selection and
press RIGHT soft key
3. Dial time band (A–D, e.g., B)
OR
Press UP or DOWN to make selection and press
RIGHT soft key
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
VALUE TIME
0
1
2
3
4
5
6
MMC 711 (Page 1 of 2)
LCR TIME TABLE
BAND
A 0
B 1
C 2
D 3
DISPLAY
Programming
February, 1999
LCRT
LCRRT 1
LCRRT 2
LCRRT 3
LCRRT 4
LCR TIME (SUN:A)
HHMM:0000 LCRT:
LCR TIME (WED:A)
HHMM:0000 LCRT:
LCR TIME (WED:B)
HHMM:0000 TIME:
1
1
1