Reset Station Passcodes To Default - Samsung DCS-816 Programming Manual

SAMSUNG
DCS-816
3. Verify time and date
Reenter if necessary
4. Press the right soft key to return to step 2
OR press TRSF to store and exit programming
OR press SPK to store and advance to the next
program.
If you have entered invalid data, you will receive an [INVALID ENTRY] message for three
seconds. Reenter the correct date and time. If the information you entered is incorrect,
repeat the procedure.

3.3 RESET STATION PASSCODES TO DEFAULT

Individual keyset users can set or change their own individual passcodes. These
passcodes are used to lock and unlock keysets, override toll restriction (call barring) and
access the DISA feature. At times, it may be necessary for the system administrator to
reset a station's passcode to default "1234". This program is used only to reset the
passcodes and cannot be used to display them.
PROGRAM KEYS
UP & DOWN
HOLD
Open customer programming and follow the instructions below.
OPERATION
1. Press TRSF 101
2.
Dial the station number (e.g., 205)
OR use the UP and DOWN keys to scroll through the
keyset numbers and press the right soft key to move
the cursor right
3.
Press HOLD to reset passcode
4. Press the right soft key to return to step 2
OR press TRSF to store and exit programming
OR press SPK to store and advance to the next
program
DEFAULT DATA:
Select the extension number.
Press to reset the passcode.
ALL STATION PASSCODES = 1234
System Administration and Special Features Guide
3 - 2
February, 1999
OLD: 2070798:1545
NEW: MMDDYY:HHMM
[201] PASSCODE
QQQQ
PASSCODE:
[205] PASSCODE
QQQQ
PASSCODE:
[205] PASSCODE
PASSCODE: 1234