Samsung DCS-816 Programming Manual page 130

Table of Contents

Advertisement

SAMSUNG
DCS-816
LCR INTER DIGIT:
MCL DELAY TIME:
OFF HOK RING INT: This timer controls the duration of time between ring
receive CAMP–ON when busy ßoff hook ringà off hook ring interval
ßoff hook ringà
OFF HOOK SELECT: This timer controls the grace period before placing a
lift handset ßoff hook select timeà starts placing a call as specified in
MMC 307
OHVA ANS TIME:
OVERLAP INT DGT: This timer controls the grace period between receiving
PAGE TIME OUT:
PAGE TONE TIME:
PARK RECALL TIME: This timer controls the duration of time a call is parked
PC–MMC LOCKOUT: This timer monitors PCMMC activity, drops the link if no
POWER DOWN TIME: This timer monitors the power down to the SLT line for
RECALL DISCONN:
RECALL WAIT TIME: This is the time any recall (hold or transfer) continues to
1) If Originator is idle:
e–hold ße–hold recall timeà recall to ßatt recallà recall toßrecallà disconnect
transfer transfer recall time originator time
This timer controls the grace period between dialling valid
digits before dropping the call and returning the user to
error tone.
This timer controls the time when the system should start
transmitting Authorisation code after sending MCL
Access code.
bursts to a user who has a camped–on call.
internal/external call as programmed in MMC 306.
This timer controls the time duration of an OHVA call
before automatic rejection. When a user receives OHVA
with voice interrupt this situation will last until this timer
expires. If LCD phones receive OHVA, REJECT will
appear at righthand side of bottom line while this timer is
activated.
address information in overlap receiving mode via
BRI/PRI line. After expiration of this timer the system
operator will be alerted.
This timer controls the duration of a page announcem–
ent.
This timer controls the duration of tone burst heard over
the page prior to the page announcement.
before recalling to the call park originator.
action is created by PCMMC and returns the system to
secure program status.
VM/AA.
This is the time an attendant recall rings before being
disconnected. See ATT Recall Time.
recall at your station before it recalls to the operator.
MMC 501 (Page 6 of 7)
Programming
February, 1999
operator disc.time

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents