Open Customer Programming - Samsung DCS-816 Programming Manual

SAMSUNG
DCS-816
MMC: 200
DESCRIPTION:
Used to open (enable) and close (disable) customer–level programming. If
programming is not opened and an attempt is made to access a system MMC,
the error message [NOT PERMIT] will be displayed. A four-digit passcode is
required to access this MMC. Each digit can be 0–9. When opened, this MMC
enables access to all MMCs allowed in MMC 802, Customer Access MMC
Number.
PROGRAM KEYS
UP & DOWN
KEYPAD
SPK
TRSF
ACTION
1. Press TRSF 200
2. Enter passcode
3. Press UP or DOWN arrow key to select
4. Press SPK to advance to MMC entry level and
5. Press TRSF key to exit
DEFAULT DATA: Closed (Disabled)
RELATED ITEMS: MMC 201 Change Customer Passcode

OPEN CUSTOMER PROGRAMMING

Display shows
Correct code shows
Incorrect code shows
ENABLE or DISABLE and press RIGHT soft
key
OR Dial 1 for ENABLE or 0 for DISABLE
press UP or DOWN key to select MMC
(e.g 212)
OR
Enter MMC number and press RIGHT soft
key to enter MMC
MMC 501 System–Wide Timers
MMC 802 Customer Access MMC Number
Select open or closed
Used to enter passcode
Save data and advance to next MMC
Exit programming
MMC 200 (Page 1 of 1)
Programming
February, 1999
DISPLAY
ENABLE CUS.PROG.
PASSCODE:
ENABLE CUS.PROG.
PASSCODE:
ENABLE CUS.PROG.
DISABLE
ENABLE CUS.PROG.
PASSWORD ERROR
ENABLE CUS.PROG.
ENABLE
212:ALARM RING
SELECT PROG. ID