Samsung DCS-816 Programming Manual page 178

SAMSUNG
DCS-816
MMC: 712
DESCRIPTION:
The LCR ROUTE TABLE is responsible for selecting a specific trunk group in the
completion of an outward bound call. This table works in conjunction with LCR
DIGIT TABLE, LCR TIME TABLE, LCR COS TABLE and LCR MODIFIED DIGITS
TABLE. After the user dials a valid digit string, the system uses the LCR ROUTE
TABLE to select a specific predetermined trunk group. There is a maximum
number of 16 routes available beginning with ROUTE NUMBER 1. If more than
one trunk group is available for call completion, the system uses the first
designated trunk group and then starts to utilise succeeding trunk groups. If all
trunk groups are busy in a selected route, call queue becomes active and allocates
trunks as they become available.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ACTION
1. Press TRSF 712
Display shows
2. Dial LCR ROUTE index number 1–16 (e.g., 05)
OR
Press UP or DOWN to selected index and press
RIGHT soft key to move cursor
3. Dial TIME BAND index number 1–4 (e.g., 2)
OR
Press UP or DOWN to selected index and press
RIGHT soft key to move cursor
4. Dial LCR COS number 1–8 (e.g., 4)
OR
Press UP or DOWN to selected COS and press
RIGHT soft key to move cursor
5. Dial TRUNK GROUP access code 0,80–82 (e.g.,
81)
OR
Press UP or DOWN to selected access code
and press RIGHT soft key to move cursor
LCR ROUTE TABLE
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
MMC 712 (Page 1 of 2)
Programming
February, 1999
DISPLAY
LCR ROUTE (01:1)
C:1 G:NONE M: –––
LCR ROUTE (05:1)
C:1 G:NONE M: –––
LCR ROUTE (05:2)
C:1 G:NONE M: –––
LCR ROUTE (05:2)
C:4 G:NONE M:–––
LCR ROUTE (05:2)
C:4 G:81 M:–––