Station Speed Dial - Samsung DCS-816 Programming Manual

SAMSUNG
DCS-816
MMC: 105
DESCRIPTION:
Allows the system administrator or technician to program the personal speed dial
locations assigned to a station. This must be done for single line telephones
because these stations cannot access programming. Each station may have up
to 50 locations or bins assigned to it in MMC 606 Assign Speed Block. The speed
dial bins are numbered 00–49. Each speed dial number consists of a trunk or
trunk group access code followed by a separator and up to 24 digits to be dialled.
These dialled digits may consist of 0–9, [ and #. If the system recognises a valid
trunk or trunk group access number, it will automatically insert the separator.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
B
C
D
E
F
ACTION
1. Press TRSF 105
2. Dial station number (e.g. 205)
3. Dial location number (e.g., 05)
4. Enter trunk access code (e.g., 9) followed
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Used to insert a flash code "F"
Used to insert a pause code "P"
Used to insert a pulse/tone conversion code "C"
Used to mask/unmask following digits (shows as "[" or "]" )
Used to enter name for speed dial bin (see MMC 106)
Display shows
OR
Press UP or DOWN to select station and
press RIGHT soft key to move cursor
If selected station has no speed dial bins,
the display will be as shown and a new
station may be selected
OR
Press UP or DOWN to select location and
press RIGHT soft key to move cursor
by the number to be dialled (e.g., 4264100)
OR
Press the RIGHT soft key to return to step 2
OR
Press the LEFT soft key to return to step 3
Press HOLD button to clear an entry
If an error is made, use DOWN arrow to
step back

STATION SPEED DIAL

MMC 105 (Page 1 of 2)
Programming
February, 1999
DISPLAY
[201] SPEED DIAL
00 :
[205] SPEED DIAL
00 :
[205] SPEED DIAL
SPDBLK NOT EXIST
[205] SPEED DIAL
05: _
[205] SPEED DIAL
05 : 9–4264100_