Alarm Reminder - Samsung DCS-816 Programming Manual

SAMSUNG
DCS-816
MMC: 112
DESCRIPTION:
Allows the system administrator or technician to set or change the alarm
clock/appointment reminder feature for any station. This must be done for single
line telephones, as they cannot access programming. Two alarms may be set for
each station and each alarm may be defined as a one–time or TODAY alarm or
as a DAILY alarm. The TODAY alarm is automatically cancelled after it rings,
while the DAILY alarm rings every day at the same time.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ACTION
1. Press TRSF 112
2. Dial station number (e.g., 205)
3. Dial 1–2 to select alarm (e.g., 1)
4. Enter alarm time in 24–hour clock format
5. Dial entry from above list for alarm type
6. Press TRSF to store and exit
0 NOTSET
1 TODAY
2 DAILY
Display shows
OR
Press UP or DOWN to select station and
press RIGHT soft key
OR
Press UP or DOWN to select alarm and
press RIGHT soft key
(e.g., 1300 for 1pm)
(e.g. 2)
OR
Press UP or DOWN to select alarm type and
press RIGHT soft key to move cursor and
return to step 2
OR
Press SPK to store and advance to next
MMC

ALARM REMINDER

Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
MMC 112 (Page 1 of 2)
Programming
February, 1999
DISPLAY
[201] ALM CLK(1)
èNOTSET
HHMM:
[205] ALM CLK(1)
èNOTSET
HHMM:
[205] ALM CLK(1)
èNOTSET
HHMM:
[205] ALM CLK (1)
HHMM:1300èNOTSET
[205] ALM CLK(1)
HHMM:1300èDAILY