Danfoss AK2-SC 255 Reference Manual page 198

RS.8D.M1.22
The fields in this screen and their uses are as follows:
Clear Alarm Logs
Clear Network Log
Clear All SC 255 Logs Clears Active Alarms logs and Cleared Alarms logs
Delete Alarm Config
Send Test Alarm
Generate system test
alarm
Suspend alarm
generation
AK2-SC 255 Reference Manual
In this SC 255 only, both the Active Alarms log and
the Cleared Alarms log will be cleared of entries.
Clears the Network alarms log (for the entire
AKCESS network).
in all SC 255's in the system.
Deletes the entire alarm configuration in this SC 255
only.
Sends a single test alarm. The Generate system
test alarm function (see below) must be enabled.
Provides a means of generating a test alarm on a
regular schedule. You can select the days of the
week, the time of generation, and the alarm action
level. This function must be enabled with a schedule
which is true for the Send Test Alarm function to
operate.
Suspends alarms. When you answer yes to this
question, another line will appear beneath it asking
you to specify a time period (from 1 to 255 hours)
during which no alarms will occur (effectively, all
alarms are disabled).
197