Danfoss AK2-SC 255 Reference Manual page 179

178
Name
Value
Status
SORT
The screens for the various types of I/O points are very similar. The screen that
appears initially is that for relay outputs. Screens for other types of points are reached
via the icons at the bottom of the screen, which are, from left to right,
Digital outputs (relay outputs)
Analog inputs (sensor inputs)
Digital inputs (On-Off inputs)
Analog outputs (variable outputs)
Other controllers
The Other Controllers selection includes a number of diverse kinds of network nodes
that can be appreciated from the menu that appears when the Other Controllers icon
is selected. The menu is shown below:
AK2-SC 255 Reference Manual
points on prior generation AKCESS I/O boards, and
points on second generation ADAP-KOOL modules
(AK2 modules).
(label field; 15 characters, any) The name of the load
connected to the point, in this case a digital output
(relay output).
(On, Off) The current value of the point.
(label) Indicates whether or not the point is in com-
munication with the SC 255.
Online: The point is communicating.
Offline: The point is not communicating.
Send [Relay outputs, sensor inputs, and on-off inputs
only]: The point is sending its status.
Receive [Relay outputs, sensor inputs, and on-off
inputs only]: The point is receiving its status
(List box; On, Off) At the bottom left of the body of
the screen (above the icons, on the same line as "PG
DN" for more is the SORT field. By default, sort
mode is On, and entries will be sorted by Bd-Pt
address. If sort mode is turned Off, points from will
be listed in order of creation. Sorting is instantaneous
when the field contents are changed.
RS.8D.M1.22