Danfoss AK2-SC 255 Reference Manual page 104

ClimaTECH
dehumidification
configuration
RS.8D.M1.22
Lockout above ambient
Delay between stages
Analog gas valve
Temperature difference
Min valve opening
Valve delay
Num of stages
Occupied setpoint
Unoccupied setpoint
Lockout below ambient
Delay between stages
Aux heat/dehumid lockout (List field: Yes, No) Whether or not auxiliary heat is to
AK2-SC 255 Reference Manual
(0.0 to 150.0) The outside ambient temperature above
which auxiliary heat will be locked out.
(0 to 99) The number of minutes after the start of an
auxiliary heat stage before the next stage can start.
Also, the minimum on time for every stage.
(List box: Yes, No) Whether or not the HVAC unit has
a controlled analog gas valve. [ClimaTECH controllers
have only one analog (variable) output. If a variable
speed fan is configured, an analog gas valve cannot be,
and vice versa.]
(-40.0 to 150.0) the difference between supply air
temperature and zone temperature.
(0 to 100) The minimum percentage of valve opening
when auxiliary heat is on.
(0 to 99) The number of seconds after the enabling
relay turns on before the analog valve can open.
(0 to 6) The number of dehumidification stages.
(-40.0 to 150.0) The dehumidification setpoint during
operating hours as configured in the Store Info screen.
(-40.0 to 150.0) The dehumidification setpoint during
store closed hours as configured in the Store Info
screen.
(-40.0 to 150.0) The outside ambient temperature
below which dehumidification will be locked out.
(0 to 99) The number of minutes after the start of a
dehumidification stage that must elapse before the next
stage can start. Also, the minimum time each stage
must run before being turned off.
be locked out when dehumidification is running. A yes
103