Configuring Refrigeration Alarms - Danfoss AK2-SC 255 Reference Manual

Configuring
Refrigeration Alarms
122
If you select Refrigeration from the Configure Alarms menu, you will be presented
with a screen listing each configured racks as at left below. Select one of the racks,
and the alarms menu for that rack will appear, as at right below.
We will select Rack C, and another submenu will appear listing all the different parts
of the system for which we can configure alarms. Note the last item on the menu at
right above, "Bitzer." This appears only because when the compressor data was
configured, Bitzer was selected as the answer to the proofing type question. Keep in
mind that as we proceed through alarm configuration, the items that present them-
selves depend upon the configuration for the mechanical devices.
Select Suction and the first page of configuration for actual alarms appears:
AK2-SC 255 Reference Manual RS.8D.M1.22