1 - 2. Configuring Refrigeration; Starting With A Partially Configured Ak2-Sc 255 - Danfoss AK2-SC 255 Reference Manual

1 - 2. Configuring Refrigeration

Starting with a
Partially Configured
AK2-SC 255
RS.8D.M1.22
There are two "routes" you may need to navigate to begin configuring refrigeration.
One begins by selecting Refrigeration from the Main menu, and the other by
selecting Configuration.
If the AK2-SC 255 you are working with was supplied with a rack, the controller may
have been partially configured by the rack manufacturer. In that case, when you
select Refrigeration from the Main Menu, the SC 255 will display the Refrigeration
Menu (left). It lists the rack or racks that are partly configured. If you want to
change or add to the configuration of one of these racks, move the cursor to the rack
name and press ENTER. The Rack menu (right) will appear. In this example, only
one rack has been previously configured.
Select Configure Rack and the Configure Rack menu appears.
Now select the type of information you want to supply. We'll cover a typical cat-
AK2-SC 255 Reference Manual 13