Section 2 Start-Up Programming (Default) - NEC Univerge SV8100 VM8000 InMail System Manual

VM8000
47-02 VM8000 InMail Station Mailbox Options
Description
Use 47-02 VM8000 InMail Station Mailbox Options to set up a station (extension)
mailbox. Station mailboxes are automatically assigned as Subscriber Mailboxes. You
can also set up Group Mailboxes as Subscriber Mailboxes.
Typically, VM8000 InMail Station Mailbox numbers 1~26 correspond to extensions
101~126.
There are three Station Mailbox categories:
Options
InMail System Guide
Undefined
Station
Group
Refer to Group (Shared) Mailbox on page 2-115
47-02-01 Mailbox Type
Use this option to enable or disable the mailbox. An extension mailbox is
not accessible when it is disabled (even though stored messages and
configuration are retained in memory.) If disabled, a user pressing Message
will initiate a remote logon and be asked to enter their mailbox number. A
voice prompt then announces: "That mailbox does not exist."
To make programming easier, consider associating a mailbox number with
H
a station port.
For example, mailbox 1 could correspond to port 1, which in turn
H
corresponds to extension 101.
See

See

Options
0 (Undefined)
1 (Personal)
2 (Group)
Default
Mailboxes 1~64 = 1 (Personal)
and

Section 2 Start-Up Programming (Default)

Subscriber Mailbox on page 2-227
Station Mailbox on page 2-225.
for more.
for more.
Issue 1.0
3 - 23