NEC Univerge SV8100 VM8000 InMail System Manual page 278

Issue 1.0
Related Features
Answer Tables
Automated Attendant
Routing Mailbox
Dial Action Table
Group (Shared) Mailbox
Screened Transfer
Unscreened Transfer
Programming
Programming DIL Overflow
1.
2 - 250
Determines how the Automated Attendant answers outside calls on each trunk.
The Answer Table determines how the Automated Attendant answers calls.
The mailbox associated with an Answer Table that specifies which dialing options (Dial
Action Table) and announcements are available to Automated Attendant callers.
Defines the dialing options for the Call Routing Mailbox chosen by the active Answer
Table.
Use Group Mailboxes for:
Department Calling Group Overflow.
A Screened Transfer from the VM8000 InMail Automated Attendant to a Department
Group master number can overflow to the group Mailbox.
An Unscreened Transfer from the VM8000 InMail Automated Attendant to a Department
Group can overflow to the group Mailbox.
Set up Direct Inward Lines.
22-02-01 Incoming Call Trunk Setup
Assign Service Type 4 to each trunk you want to be a DIL. Make a separate
entry for each Night Service mode.
By default, trunks are Service Type 0 (Normal).

22-07-01 DIL Assignment
For each trunk designated as a DIL above, enter the extension number of
the DIL destination (e.g., 306). Make a separate entry for each Night
Service mode.
By default, no DIL destinations are programmed.

VM8000
Features