NEC Univerge SV8100 VM8000 InMail System Manual page 367

VM8000
InMail System Guide
47-15-06 Time Limit for Dialing Timeout (Dialing Timeout)
This option determines how long VM8000 InMail waits for the caller
connected to the Directory Dialing Mailbox to dial before repeating the
Directory Dialing Message. If the caller doesn't dial within three repeats of
the message, In-Mail routes the call to the Next Call Routing Mailbox for the
Directory Dialing Mailbox (if any) or hangs up. The entry range for this
option is 0~99 seconds. A setting of 0 = no timeout.
Refer to

Options
1~99 seconds
0 (No timeout)
Default
5
47-15-07 Fax Detection
Use this option to enable or disable Fax Detection for the Directory Dialing
Mailbox. If enabled (1), the Directory Dialing Mailbox detects incoming fax
CNG tone. The fax then routes to the company fax machine according to
the settings of 47-01-06 Fax Extension. If disabled (0), the Directory Dialing
Mailbox does not detect incoming fax calls.
Refer to

Options
0 (No - disabled)
1 (Yes - enabled)
Default
0 (No - disabled)
47-15-08 Next Call Routing Mailbox (Next CR Mbox)
Use this option to specify the Next Call Routing Mailbox (1~32) for the
Directory Dialing Mailbox. If a Next Call Routing Mailbox is specified, the
following occurs:
If the caller dials 0 while listening to the Directory Dialing Message, the call
H
routes to the 0 action programmed into the Dial Action Table associated
with the Next Call Routing Mailbox.
If the caller dials # while listening to the Directory Dialing Message, the call
H
routes immediately to the Next Call Routing Mailbox and the recorded
Instruction Menu Message for that mailbox is played.
Refer to

Options
Call Routing Mailbox Number (up to 2 digits)
No entry - 0 (Entered by pressing Hold)
Default
No entry - 0
By default, Call Routing Mailbox numbers are 1~8.
Directory Dialing on page 2-69.
Directory Dialing on page
Directory Dialing on page
2-69.
2-69.
Issue 1.0
3 - 81