NEC Univerge SV8100 VM8000 InMail System Manual page 335

VM8000
InMail System Guide
Options
0 (No repeats)
1~10 (Announcement repeats 1~10 times)
Default
0 (No repeats)
47-09-03 Hang Up After (HangUp)
Use this option along with Next Call Routing Mailbox and Repeat Count
above to provide additional routing options to Automated Attendant callers.
PRG 47-07-02 must be set to 1 (Announce) for this setting to be used.
For a detailed explanation of the interaction of these options, turn to the following

charts:
Direct Announcement Mailbox Routing on page
Routed Announcement Mailbox Routing on page
Announcement Mailbox on page 2-17
Mailbox on page
Options
0:None
This setting enables the option of sending the caller to another Call Routing
or Announcement box. The destination Call Routing box is set in 47-05-01.
If no destination Call Routing box is set, the system plays "Goodbye" to the
caller after playing the Call Routing Announcement Box greeting then
hangs up.
1:Goodbye
When this setting is enabled the system plays "Goodbye" to the caller after
playing the Call Routing Announcement Box greeting, then hangs up.
Callers cannot be routed to another Call Routing box with this setting
enabled.
2:Silent
When this setting is enabled the system will hang up the caller after playing
the Call Routing Announcement Box greeting. Callers cannot be routed to
another Call Routing box with this setting enabled.
Default
0:None
and
2-193.
Issue 1.0
2-196.
2-19.
Next Call Routing
3 - 49