NEC Univerge SV8100 VM8000 InMail System Manual page 358

Issue 1.0
UTRF Action - Unscreened Transfer (2) (UTRF)
Use this action to allow an Automated Attendant caller to place an Unscreened
Transfer to an extension. This is similar to telephone system unscreened transfers in
which the transferring party immediately extends the call. After an Automated
Attendant caller dials an extension, VM8000 InMail transfers the call to the destination
and hangs up. Any recalls or additional routing are handled by the telephone system
– just as with any other unscreened transfer.
REC1 Action - Quick Message With Greeting (3) (REC1)
Use this action to allow an Automated Attendant caller to leave a Quick Message at
an extension. With this action, the caller hears the extension greeting prior to leaving
the message.
3 - 72
Number Option
Normally, the corresponding Number option should be XXX. Note that the
key you choose for this action is the first digit of the called extension
number.
For example, to allow callers to place Unscreened Transfers to extensions

101~199, for key 3 enter UTRF for the Action and XXX for the corresponding
Number.
To have Unscreened Transfer call a specific extension, the corresponding
Number option should be that extension's number. The caller then dials that
single digit to reach the extension.
For example, to have callers dial 8 to reach extension 303, for key 8 enter UTRF

for the Action and 303 for the corresponding Number.
Additional Information
Refer to the Unscreened Transfer (UTRF) Operation on page 2-246
routing chart.
Also see Screened Transfer on page 2-217
Number Options
To have the caller leave a quick Message at a specific extension, the
corresponding Number option should be the extension number.
To have the caller leave a Quick Message at any caller-dialed extension,
the corresponding Number option should be IXXX.
To have the caller leave a Quick Message at a caller-dialed extension in a
specific range, the corresponding Number option should be XXX.
For example, to allow callers to leave a Quick Message extensions 101~108, for

key 3 enter REC1 for the Action and XXX for the corresponding Number.
Additional Information
See Quick Message on page 2-203
and Unscreened Transfer on page
for more.
VM8000
to see the call
2-245.
Programming