NEC Univerge SV8100 VM8000 InMail System Manual page 311

VM8000
InMail System Guide
Options
0 (Erase)
After the subscriber listens to the entire new message and hangs up,
In-Mail erases the message.
1 (Save)
After the subscriber listens to the entire new message and hangs up,
In-Mail saves the message.
Default
1 (Save) (see above).
47-02-07 Recording Conversation Beep (Rec Conv Beep)
Use this option to enable or disable the Conversation Record beep. If
enabled, all parties on a call will hear the voice prompt Recording followed
by a single beep when the extension user initiates Conversation Record. If
disabled, the voice prompt and beep will not occur. When you disable the
Conversation Record beep, the following voice prompts do not occur while
VM8000 InMail records the conversation:
"Recording" (followed by a beep)
H
"That mailbox is full" (if the mailbox message storage capacity is reached)
H
"You have reached the recording limit" (if the recorded message is too long)
H
The SV8100 telephone system software provides an additional
Conversation Record beep. This beep repeats according to the setting of
Program 45-01-06 Voice Mail Integration Options: Record Alert Tone
Interval Time (0~64800 seconds). To disable the SV8100 telephone system
Conversation Record beep, enter 0 for this option.
See Live Record on page 2-139

Options
1 (Yes - enabled)
0 (No - disabled)
Default
1 (Yes - enabled)
47-02-08 Message Waiting Lamp (Update MW Lamp)
Use this option to enable or disable Message Waiting lamp at the extension
associated with the Subscriber mailbox. For Subscriber Mailboxes, leave
this option enabled. For Guest Mailboxes, leave this option disabled.
See Guest Mailbox on page 2-123

Disabling this option also disables Message Notification. See

Notification on page 2-173
See Message Waiting Lamp on page 2-189

See Subscriber Mailbox on page 2-227

Options
1 (Yes - enabled)
0 (No - disabled)
Default
1 (Yes - enabled)
for more.
for more.
for more.
for more.
for more.
Issue 1.0
Message
3 - 25